|
|
|
|
|
Baffle Detail
Baffle drilling detail
This is a close-up of the holes drilled in the 1/2 inch pvc tubing. Don't glue the baffle pipe assembly together, it will be very hard to clean if you do. The drill size I used was .047 inches (a number 56 bit).
Baffle drilling detail
This is a close-up of the holes drilled in the 1/2 inch pvc tubing. Don't glue the baffle pipe assembly together, it will be very hard to clean if you do. The drill size I used was .047 inches (a number 56 bit).
 Baffle detail |
|||
| back |
|
|
This work is licensed under a Creative Commons Attribution-ShareAlike 2.5 License. terms of use
